4-5 HP Air Compressor Pump Single Stage 3-Cylinder 10-12 CFM Compressor Source CS3065A

The Compressor Source CS3065A is a three-cylinder cast-iron single-stage air compressor pump. This is a 4-5 horsepower pump that will deliver up to 10-12 CFM, depending on the RPM. This pump is most commonly used on compressor tanks about 60 gallons in size and can be used with 220-volt 4-5 horsepower electric motors. To verify your motor is large enough, it should be around 17-22 amps at 220 volts. All specifications listed on the pump-spec plate are ratings at minimum horsepower and RPM. This pump comes complete as shown, including intake filters and flywheel. Features: Cast Iron Cylinder and Crankcase Equipped with Sight Glass for Easy Viewing of Oil Level Comes with Three Intake Filters Low Oil Consumption Specifications: Three Cylinder Single Stage 4-5 HP Cylinder Diameter: 65mm Maximum Recommended Working Pressure: 115 PSI Recommended RPM: 1000-1200 CFM: 10-12 Max Flywheel Diameter: 10.5" Mounting Hole Dimensions Center to Center: Front to Back: 5.2" Side to Side: 8.43"

• 3-cylinder cast-iron single-stage air compressor pump.
• This is a 4 to 5-horsepower pump that will deliver up to 10 - 12 CFM.
• This pump is most commonly used on compressor tanks about 60 gallons in size and can be used with 220-volt 4-5 horsepower electric motors.
• Low Oil Consumption
• Cylinder Diameter: 65mm / Flywheel Diameter: 10.5"