7/8" x 24' Colored Half-Round Body Side Molding for Cars, Trucks, and SUVs (Super Black)

Application Procedures 1. The body of the vehicle must be clean and dry to achieve the best adhesion. Clean with 70% Isopropyl Alcohol. 2. The pressure sensitive adhesive on the molding must not be contaminated during the application. 3. The molding must be applied to achieve complete contact (bond) of the adhesive to the vehicle. (i.e. maximum wet-out) 4. Molding adhesion is best when applied at temperatures above 80 degrees Fahrenheit to 110 degrees Fahrenheit. 5. During cold weather, warm molding with a heat gun or heat lamp. Be careful not to damage the surface. 6. Cut molding with an anvil type cutter to proper length. 7. Allow 24 hours for molding to set.

• Color Trim 7/8" Half Round Body Side Molding
• This Body Side Molding comes in 24 and 100 ft. rolls.
• This Molding is only offered in Black and White, however if you are looking for a different color, or size, or style we may be able to Get that for you! Just message us!
• ***IF you aren't sure, SEND US A MESSAGE with your car's paint code, and we will MATCH FOR YOU***
• This Half Round Body Side Molding can be used in vehicles, furniture, spas, tubs and almost any unfinished edge. It comes with a 3M Acrylic Foam Tape for easy, quick installation.